Take a CP hydraulic core drill with you when installing drainage, sewer and water pipes, or cable and ventilation ducts where large, deep holes are needed. CP core drills are well suited for drilling concrete, masonry and asphalt materials. They can be operated freehand or mounted in a drill stand.
Hydraulic control of the drill torque helps to reduce kickback when drill bits jam. So you're in control, even when drilling holes of 8 inches in diameter and above. Due to the CP core drill's compact design, you can easily drill holes of up to 8 inches freehand.
|
Specifications |
COR 5 |
COR 15 |
|
Weight |
18 lbs |
18 lbs |
|
Oil Flow |
5-8 gpm |
5-8 gpm |
|
Length Without Drill |
16" |
16" |
|
Working Pressure |
1160-2500 psi |
1160-2500 psi |
|
Revolutions |
600-900 rpm |
600-900 rpm |
|
Drill Diamater |
2-8" |
0.5-3" |
|
Thread Female (drive) (1) |
1/2" BSP |
1/2" BSP |
|
HTMA Type |
| / || |
| / || |
|
Part Number |
1806 1014 54 |
1806 1014 55 |
1) 1/2" BSP male × 1 1/4 UNC male drive adaptor included for use of larger diameter core bits.
