JLH Series Lever Hoists

· 3/4 to 6-ton capacities

· Available in 5', 10', and 20' lifts

· Light weight, compact design for low head room applications

· All units feature premium 100 grade chain for extreme
wear resistance

· Patented fused break disc design for low maintenance

· Caged roller bearings used on load sprocket increase ease to
use of efficiency

· Lever Hoist with Overload Protection

CAUTION

Be sure that the supporting structures and load-attaching devices used in conjunction with this hoist provide an adequate safety factor to handle the rated load plus the weight of the equipment. If in doubt, consult a qualified structural engineer. This equipment is not to be used for lifting, supporting or transporting people, or lifting or supporting loads over people.

IMPORTANT

Before installation, read owner's manual for additional warnings and precautions. Not for use in an explosive environment.

 

Stock No. Model Capacity (Tons.) Capacity (Lbs.) Standard Lift (Ft.) Headroom (In.) Number of Falls Load Chain (Dia./MM) Lever Length (In.) Pounds Pull to lift Capacity Lift Per Full Turn of Lever (In.) Weight (Lbs.)
375005 JLH-80WO-5 0.8 1760 5 11 1 5.6 9 5/8 64 1 1/8 12.50
375010 JLH-80WO-10 10 15
375020 JLH-80WO-20 20 19.50
315005 JLH-160WO-5 1.6 3520 5 13.1 1 7.1 10 3/8 75 7/8 17.50
315010 JLH-160WO-10 10 21.25
315020 JLH-160WO-20 20 28.50
330050 JLH-320WO-5 3.2 7040 5 15.5 1 10 16 5/16 82 3/4 30
330100 JLH-320WO-10 10 38
330200 JLH-320WO-20 20 53
360005 JLH-630WO-5 6.3 13860 5 21.2 1 10 16 5/16 84 3/8 57.25
360010 JLH-630WO-10 10 72
360020 JLH-630WO-20 20 103

 




Copyright © 2024 T4Tool
Your IP Address is: 3.133.121.160
wastrong template